How To Print Your Own Wall Art – Add your own unique art to your walls with these easy to print fabric rolls! Print on your own laser printer and the best part is you get to choose the art on them!
This DIY printed scroll wall hanging is a fun project. My rolls are on the smaller side of the larger rolls I’ve seen, but I think they turned out amazing! After making this one, I had to make a bigger one too!
How To Print Your Own Wall Art
Don’t you just love the look of the rolls? How about scrolls being so cool? Maybe it’s because we’re so interested in things from history that I think that’s all that was written in my head. I think it’s because it reminds us of a time in the past when we romanticized movies and books. But do we really want to live back in the days of scrolls? I don’t think so…LOL! Well, whatever, I’ve wanted to make scrolls for a long time because I like the look of them too.
Personalised Date Wall Art Print By The Rustic Dish®
This is actually a two-for-one tutorial because I show you how to print the fabric and how to make the rolls. Just be prepared, this is a long post, but full of great information! I have birds on my rolls to go with my spring farmhouse bird quilt, but you can do whatever you want with them. I can think of so many great ideas like for botanical summer, pumpkin fall, or just words anytime!
*This post contains links to products I have used or similar to products I have used. If you buy something from one of the links above, I may ask for a small commission (at no extra cost to you) from the purchase. I don’t recommend anything I wouldn’t buy myself.
First, you need to know how big the roller wall hanger should be. I wanted mine to match the background of my tablecloth and I wanted 4 of them so I decided to go with the smaller size. Obviously, since we’re printing on fabric for this method, you’re also limited to the size your printer prints. So I calmed down and cut the fabric to the size of a piece of paper, 8.5″ x 11″.
The muslin I used was a scrap material and only had enough to make 4 rolls. I’m sure you can guess where this is going. 🙂 Murphy’s Law of course, somehow I got my measurements and ended up cutting one piece too narrow! And! That’s why I have two coils slightly smaller than the other two. Don’t worry, everything works! So my fabric measurements are:
Printable Wall Art: Stylish Etsy Prints
When cutting the kraft paper, I only cut it 3/4″ wider than my fabric. I cut the width of the top of the roll, but left the total length 36 cm so that it would be enough to roll up. The kraft paper is as follows:
Find the image you want to print and size it to fit in a Word document. I just googled bird images to find what I used. If you want to use the same images, I’ve linked them below:
The simplest way of fabric printing is the freezer paper technique. It also works with an inkjet printer if you have one. Before trying it, I couldn’t find much information about whether it would work with a laser printer during my research, but spoiler alert, it’s perfect! Score!
Cut four pieces of freezer paper the same size as a regular sheet of paper, 8.5 x 11 inches. The freezer paper is what is actually passed through the printer and gives the fabric the strength it needs to print.
Things We Learn From A Dog
Line the freezer paper directly over the piece of fabric and iron the shiny side of the freezer paper onto your fabric. The plastic coating adheres to the fabric to hold it there while printing, but don’t worry, it peels off easily and won’t leave a mark on the fabric. Cut loose threads from the edges of the fabric.
Load the freezer paper into the printer like a regular piece of paper. Make sure you know which section to load vs. It’s a good idea to test print on a piece of paper before doing this so you don’t print on the wrong side. An easy way to do this is to simply mark an “X” in one corner and watch the paper load where the “X” is. If an “X” appears on the printed page, it is good. 🙂
The printed material comes directly off the freezer paper. There is some ink left on the freezer paper which is a bit wet so be careful not to get it on the end. 🙂
I wanted to make the edges smaller so it looked like an old piece of fabric, so I just pulled a few threads from all the edges. If the thread doesn’t go straight (like the top of the fabric in the picture below), you’ll need to cut the thread after pulling it a bit so it’s not as low as you’d like. Be careful when doing this, you can remove but not add more threads. 😉
How To Create Light Up Canvases With Digital Prints
I bought two 1/2″x48″ dowels to make 4 coils. I had Mr. Dowels are amazing to me. We cut the wider dowels to 11.25″ and the narrower ones to 10″.
He gave a great tip on cutting the dowels. Place blue masking tape around the cut area. This way the cutting edges will be nice and clean. He cut the dowels with a miter saw, but a hand saw also worked.
See how the dowels on the left have a cleaner cut than the one on the right, which was cut without using the blue tape?
I didn’t put a top coat on the dowels because I wanted them to look older. I just put them in a mason jar to dry while we assembled the rolls.
Wall Art Print
We used spray adhesive to attach the fabric to the kraft paper. We cover our workbench with a plastic drop cloth and cover all external areas with it. So we didn’t get the spray adhesive everywhere. Apply a generous amount of glue to the back of the fabric.
Ask for help transferring fabric to kraft paper! It’s easier with help. We put two pieces of scrap wood on the kraft paper to smooth it out, then measured and marked a little where the material would go. We picked up Mr. The fabric is wonderful at the corners and is gently applied to the tissue paper when turned over. Keep it tight when you figure out the placement before you put it on or it will stick where you don’t want it! From the center to the finish, we wrapped the material completely in the paper using a brayer. Alternatively, you can use your hand to press in the same way if you don’t have a brayer.
To place the dowels on the kraft paper, I rolled them up at both ends. It is easy to start the roll by attaching the paper to the dowel with three pieces of tape.
I then continued to roll the dowel evenly to keep the roll straight. Towards the end of the roll, I run a thin bead of hot glue down the length of the dowel and hold it for a few seconds to make sure the glue is dry.
Custom Canvas Print Wall Art Personalized Name From Son And Daughter M
After attaching the dowels to the kraft paper to make the coils, we need to make holes on both sides of the top dowel. This makes it easier to attach the jute twine to hang the roll. We use a drill that is larger than the jute twine. Mr. W drill a hole 1/2 inch from the edge of each top dowel.
Blow the jute twine over the hole you just drilled. Leave about 6-7 inches at the end, but don’t cut the other end of the jute yet.
Add a drop of hot glue to the dowel and start wrapping the jute around the ends of the dowel.
I wrapped the dowel 4 times and finished it on the back of the roll. strongly
How To Make Your Own Printable Wall Art
Print your own wall mural, how to print your own stamps, how to print your own wedding invitations, print your own art prints, print your own canvas art, how to print your own playing cards, how to print your own checks, how to print your own coloring book, how to print your own business cards, create your own art print, print your own wall art, print your own canvas wall art